System configuration
System settings - System Setup
Changing the system settings - System Setup
In the
System Setup
submenu you can set up the following:
– the time (in the field marked
Time
)
– the date (in the field marked
Date
)
– the serial port (in the field marked
COM Port
)
– the parallel port (in the field marked
LPT Port
)
– the cache memory (in the field marked
Cache Memory
)
– the pointing devices (in the field marked
Pointing Device
)
– the power-on self-test (in the field marked
Pointing Device
)
F3D31 System Setup 01.09.95
---------------------------------------------------------------------------
Time (H:M:S): HH:MM:SS
Date (D.M.Y): DD.MM.YY
[Internal Floppy Drive: Drive A 1.44MB 3.5Inch]
[External Floppy Drive: Drive B 1.2MB 5.25Inch]
Cyl Hd Sec Mbyte
Internal Hard Disk: Auto 1016 16 63 500
[External Hard Disk: Auto 1016 16 63 500]
Base Memory: 640KB Shadow BIOS: Enable
Extended Memory: 7MB Cache Memory: Enable
COM Port: COM1 Pointing Device: PS/2 Type
IR Port: COM2 Quick Boot: Disable
LPT Port: LPT1 Audio Device: 220h
Mode: Bidirectional
---------------------------------------------------------------------------
Esc F3 F10
↑↓
←
/
→
Main Menu Set Default Save Field Value
The
System Setup
submenu
Time
Date
The
Time
field and the
Date
field indicate the time and date according to the
notebook's built-in clock. If you change these settings, enter the time in the format
HH:MM:SS
(hours:minutes:seconds) and enter the date in the format
DD.MM.YYYY
(day/month/year).
Internal Floppy Drive
External Floppy Drive
These two fields show the types of floppy drive installed in the notebook (internal)
and in the docking unit (external). If a floppy disk drive is not installed or the
docking unit is not connected, the relevant item does not appear on the display.
52
A26391-K64-Z100-2-7619
