The battery Operation
Installing an additional battery
Switch off the notebook.
Pull the power plug of the power supply unit out of grounded wall outlet
Close the cover of the notebook so that it locks into place on the left and right.
Disconnect any cables attached to the notebook.
Place the notebook bottom-up on a flat surface.
1
2
Push the floppy disk compartment's release tab in the direction of the arrow (1).
Remove the floppy disk drive from the compartment (2).
Insert the battery, contacts first, into the floppy disk compartment. The contacts
must face upwards.
Push the battery into the compartment until it clicks into place.
Turn the notebook over and place it on a flat surface with the underside facing
downwards.
Reconnect the cables you previously disconnected.
A26391-K64-Z100-2-7619
43
