Installing the operating system
Preparation for use
Installing the operating system
2
1
a
b
a = Power switch
b = Trackball
Slide forward the release tabs (1) and swing open the cover (2).
When you install software you have to work with floppy disks, the keyboard
i
and the trackball. If you are unfamiliar with using floppy disks or input
devices, see "Using floppy disks" and "Displays and input devices" in the
"Operation" section.
!
You must not power-cycle or warm-boot your notebook during first-time
installation .
Press the power switch for roughly one second.
Wait until a choice of different languages is displayed on screen.
Select the language to be used for the installation procedure by pressing the
appropriate function key (e.g. press the
F2
function key for language 2).
Select the language in which the operating system is to be installed by pressing
the appropriate function key.
Once the correct language is displayed, press the Enter key.
Note that your choice of language is final and cannot be reversed.
A26391-K64-Z100-2-7619
13
