Important notes
In this chapter you will find information regarding safety which it is essential to take
note of with your notebook. The chapter also contains information on the licenses
issued for your notebook.
Safety
This device complies with the relevant safety regulations for data processing
equipment, including electronic office machines for use in an office environment. If
you have any questions, contact your sales office or our customer service.
– Always use the bag supplied when transporting the notebook.
If it needs to be shipped, use the original packaging or other suitable packaging
to protect it from damage through mishandling.
– If the device is brought into the installation site from a cold environment,
condensation can form. Before operating the device, wait until it is absolutely
dry and has reached approximately the same temperature as the installation
site.
– Read the information on environmental conditions before setting up and using
the notebook (see the sections "Preparation for use" and "System
specifications").
– Only run the notebook off the battery or power supply unit included, or off
authorized accessories (car adapter, docking unit or station box).
– The power supply unit has a specially approved power cable and must only be
connected to a grounded wall outlet. If the power adapter is connected to the
grounded wall outlet, it must be free-standing. The power adapter may not be
covered while it is in operation. Do not stand it on heat-sensitive material.
– Ensure that the power socket on the power supply unit or the grounded wall
outlet is freely accessible.
– The power switch does not disconnect the device from the line voltage. To do
this, you must pull out the power plug.
– Lay all cables so that nobody can stand on them or trip over them. When
attaching the PC, observe the relevant notes in the chapter "System expansion".
– No data transmission cable should be connected or disconnected during a
thunderstorm.
A26391-K64-Z100-2-7619
3
