11
System Overview
Sample Processing
Inserting a Test Card
1. When the Host displays the message “Insert test card to
begin test,” open a test card pouch
2. Position the test card with the sample port facing upwards
3. Insert the test card. Upon successful insertion, the epoc
reader will beep once and calibration will begin. The reader
must remain on a flat surface throughout testing
4. After calibration is complete, the message
“Inject Sample”
will appear on the Test Results page tab
Note:
Calibration takes approximately 165 seconds
After calibration is complete, the Host will display
a status bar indicating the time remaining to
inject a sample (450 seconds)
