14
8027092/AE00/V1-0/2022-10| SICK
O P E R A T I N G I N S T R U C T I O N S | VISIC100SF
Subject to change without notice
5
OPERATION
5.2.3
Keypad
5.3
Navigating and setting
5.4
Status and malfunction messages
Possible status and malfunction messages are described in the respective Menu Section.
5.5
Measuring point
The term measuring point (MP) refers to a gas sensor connected to the VISIC100SF.
For a sensor with digital communication, the display shows
DP = Digital Measuring Point.
The number following is always 1 because the adjustment tool can only address one
sensor.
Key
Designation
Function
ESC key
●
Terminate program
●
Query whether value should be saved
●
Return to previous menu level
Confirm key
●
Select submenu
●
End value input
●
Store parameter
Arrow up
●
Navigating within a menu level
●
Change value
Arrow down
●
Navigating within a menu level
●
Change value
Arrow left
●
Change cursor position
Arrow right
●
Change cursor position
Press key
Action
Open menu.
and
Move cursor to position segment to be changed.
and
Use to set the desired parameter or setpoint.
End value input.
and
Change other parameters in the same menu.
End value input.
Save changed value?
Yes
and return to next higher menu or
No
and return to next higher menu.
Old value is not overwritten.
