1.
Attach the mounting plates using two hexagon socket head cap screws (A/F 3) on
each.
2.
Use the mounting plates to attach the device at the intended mounting site.
5.5
Mounting the device (at a critical ambient temperature of max. 50 °C)
NOTICE
To prevent damage to the device or the attached peripheral devices at high ambient
temperatures of a maximum of 50 °C, the following extended installation conditions
must be taken into account when mounting the device.
Prerequisites:
•
Device is mounted vertically (device name on top)
•
Mounting takes place using the supplied sliding nuts and the holding plate, which
is available as an accessory
•
Aluminum profiles for mounting on the system (min. 600 mm in length)
•
No direct sunlight and heat radiation
•
Distance to other components or housing walls: Min. 400 mm
5
MOUNTING
18
O P E R A T I N G I N S T R U C T I O N S | SIM2000ST
8020764/1FTA/2022-05-02 | SICK
Subject to change without notice
