5
Mounting
5.1
Overview of mounting procedure
NOTE
The mounting procedure described here for the device meets the requirements for use
in the target system.
Additional or different requirements may become necessary in the laboratory and dur‐
ing preparation, and should be taken into account as necessary,
. If you have any questions or anything remains unclear in this regard, please
contact our service team.
•
Mounting the bracket, if provided.
•
Mounting the device.
•
Assembling and laying cables.
•
Connecting peripheral devices.
•
Connecting the voltage supply.
5.2
Scope of delivery
•
SIM2000ST
•
1 x grounding screw
•
1 x toothed lock washer
•
Safety note
5.3
Preparing for mounting
Mounting requirements
NOTE
Two mounting methods along with the relevant accessories are recommended:
•
Via mounting rail (accessory part no. 2084765)
•
Via adapter plates (accessory part no. 2084764)
•
Select the mounting site: Plan space requirements and sufficient distance from
other devices. Be aware of the possibility of heat dissipation.
•
Unpack the device and allow to acclimatize to avoid formation of condensation.
•
Prepare vibration reduction measures, if necessary.
Preparing for mounting with mounting rail
1.
Place the mounting rail at the mounting site.
2.
Mark the mounting holes.
3.
Proceed to drill the mounting holes.
Preparing for mounting with adapter plate
1.
Place the adapter plate at the mounting site.
2.
Mark the mounting holes.
3.
Proceed to drill the mounting holes.
MOUNTING
5
8020764/1FTA/2022-05-02 | SICK
O P E R A T I N G I N S T R U C T I O N S | SIM2000ST
15
Subject to change without notice
