X = Compatibility mode not required
3)
Table 15: Required compatibility mode with different firmware versions of the S3000 in an EFI
system with other safety laser scanners
Fir
m
w
ar
e
S300 S
tand
ard
S300 S
tand
ard
S300 A
dv
anc
ed
S300 A
dv
anc
ed
S300 Pr
of
es
sional
S300 Pr
of
es
sional
S300 Pr
of
es
sional CMS
S300 Exper
t
S300 Exper
t
S300 Exper
t
Fir
m
w
ar
e
≥ 02.10
< 02.10
≥ 02.10
< 02.10
≥ 02.10
< 02.10
< 02.35
1)
≥
02.10
< 02.10
< 02.10
1)
S3000 Stan‐
dard
≥B02.41
X
–
X
C
X
C
C
X
C
C
S3000
Advanced
≥B02.41
X
–
X
C
X
C
C
X
C
C
S3000 Profes‐
sional
≥B02.41
X
–
X
C
X
C
C
X
C
C
S3000 Expert
≥B02.41
X
–
X
C
X
C
C
X
C
C
S3000 Remote
≥B02.41
X
–
X
C
X
C
C
X
C
C
1)
This variant supports exclusively the compatibility mode
C
= Compatibility mode required
X = Compatibility mode not required
4)
– = EFI system not supported
Complementary information
NOTE
The S300 Mini does not support the compatibility mode. For EFI systems with the S300
Mini safety laser scanner, a device must be used that is not operated in the compatibil‐
ity mode.
Further topics
•
7.5
System parameters
You can assign a name to the configured application as well as to the safety laser scan‐
ner(s). The names are saved in the devices after the configuration is transferred. The
name chosen may be, for example, the identifier for the vehicle, system or the machine.
You enter the application name and the names of the safety laser scanners used in the
CDS.
3)
Make sure that you have the latest S3000 I/O module (S3000 Standard, Advanced, Professional with I/O module with serial number
> 12210000, S3000 Remote with I/O module with serial number > 11240000).
4)
Make sure that the serial number of the S300 system plug is > 12210000 and that the S3000 I/O module is current (S3000 Standard,
Advanced, Professional with I/O module with serial number > 12210000, S3000 Remote with I/O module with serial number
> 11240000).
7
CONFIGURATION
86
O P E R A T I N G I N S T R U C T I O N S | S3000
8009942/ZA18/2019-11-14 | SICK
Subject to change without notice
