Function
Standard
Advanced
Professional
Expert
Remote
1)
Can be used to simul‐
taneously monitor 2
areas. The areas can
be monitored with one
protective field and
one warning field
respectively (dual field
mode) or 2 protective
fields
4)
tive field mode). This
allows up to 4 protec‐
tive fields to be moni‐
tored
5)
.
✓
✓
✓
✓
✓
Field sets comprising
one protective field
and 2 warning fields
(triple field mode) with
an angular resolution
of 0.5°
1
4
8
21
21
6)
Field sets comprising
one protective field
and 2 warning fields
(triple field mode) with
an angular resolution
of 0.25°
1
4
8
10
10
Programmable moni‐
toring cases in stand-
alone operation
1
4
16
32
–
Programmable moni‐
toring cases in an EFI
system
32
32
32
32
32
Static control inputs
for monitoring case
switching
–
2
2
2
–
Static/dynamic control
inputs for monitoring
case switching
–
–
2
2
–
EFI interface (safe
SICK device communi‐
cation)
✓
✓
✓
✓
✓
Output of measure‐
ment data (surround‐
ing contour)
✓
✓
✓
✓
✓
Extended CMS fea‐
tures (reflector detec‐
tion, filter function for
measured values)
–
–
–
✓
–
1)
Valid for I/O modules with serial number > 11240000.
2)
The second field set on the device can only be used as a simultaneous field set.
3)
Maximum possible number of field sets. The actual number is the same as for the S3000 variant to
which a safety laser scanner is connected.
4)
Function is available for firmware B02.43 or above.
5)
If two or four protective fields are being monitored, the cut-off paths must be routed to independent
OSSD pairs using a Flexi Soft safety controller.
6)
Only in conjunction with S3000 Expert or in standalone operation with a Flexi Soft safety controller.
3
PRODUCT DESCRIPTION
18
O P E R A T I N G I N S T R U C T I O N S | S3000
8009942/ZA18/2019-11-14 | SICK
Subject to change without notice
