![background image](http://html.mh-extra.com/html/sick/ranger3/ranger3_operation-instructions-manual_1263837045.webp)
Parameter
Type
Description
Visibility
Access
GevCurrentIPConfigurationDHCP
bool
Controls whether the DHCP IP configuration scheme is
activated on the given logical link.
The device falls back to Link Local Address in case no
DHCP response is received after several timed out
requests.
Expert
RW
GevCurrentIPConfigurationLLA
bool
Controls whether the Link Local Address IP configura‐
tion scheme is activated on the given logical link.
Expert
R
GevCurrentIPAddress
int
Reports the IP address for the given logical link.
Expert
R
GevCurrentSubnetMask
int
Reports the subnet mask of the given logical link.
Expert
R
GevCurrentDefaultGateway
int
Reports the default gateway IP address to be used on
the given logical link.
Expert
R
GevPersistentIPAddress
int
Controls the Persistent IP address for this logical link. It
is only used when the device boots with the Persistent
IP configuration scheme.
Expert
RW
GevPersistentSubnetMask
int
Controls the Persistent subnet mask associated with
the Persistent IP address on this logical link. It is only
used when the device boots with the Persistent IP con‐
figuration scheme.
Expert
RW
GevPersistentDefaultGateway
int
Controls the persistent default gateway for this logical
link. It is only used when the device boots with the Per‐
sistent IP configuration scheme.
Expert
RW
GevTimestampTickFrequency
int
The timestamp tick frequency in Hz. Used for time‐
stamping frames, chunks and events.
Expert
R
GevDiscoveryAckDelay
int
Indicates the maximum randomized delay the device
will wait to acknowledge a discovery command.
Expert
R
Table 35: GigEVision control custom commands
Command
Description
Visibility
Access
GevNetworkInterfaceReconfigure
Reconfigures the network interface according to the
settings made. If the settings have changed the con‐
nection will be lost to the device and it may get a new IP
address.
Expert
RW
7.13.13
Firmware update
Table 36: Firmware update custom parameters
Parameter
Type
Description
Visibility
Access
FirmwareUpdateProgress
enum
The current state of the firmware update process.
Guru
R
FirmwareUpdateScriptProgress
float
Estimated progress of update script. 0.00 means not
started, 1.00 means finished.
Guru
R
FirmwareUpdateScriptRemaining‐
Time
int
Estimated time left of the firmware update script.
Guru
R
CONFIGURATION
7
8020774/14IM/2019-07 | SICK
O P E R A T I N G I N S T R U C T I O N S | Ranger3
45
Subject to change without notice