Starting and stopping the image acquisition
The
Start
and
Stop
buttons in the Parameter editor are used to start and stop the image
acquisition, as an option to the corresponding buttons in the main user interface. Use
these buttons to control the image acquisition directly from the Parameter editor during
parameter adjustment.
Editing parameter values
Editable parameters have white input fields. Click an input field to edit its value. For
non-editable parameters, the input fields are inactivated and displayed in gray.
Most input fields are locked during image acquisition, which means that the parameter
values cannot be changed. When hovering over a locked input field, a warning message
appears. Click a locked input field to unlock it and stop the image acquisition.
8.1.2.1
Visibility options
The visibility options
Beginner
,
Expert
, and
Guru
defines which features that are shown in
the Parameter editor. They are described in the table below.
Table 38: Visibility options
Beginner
Basic features that are enough to operate the camera.
Expert
In addition to the basic features, also features that require a more in-depth
knowledge of the camera functionality.
Guru
All features that are available in the camera. This includes advanced fea‐
tures that can bring the camera into a state where it will not work properly
anymore.
8.1.3
Workflow steps
Figure 23: Workflow steps
The following workflow steps are available:
Start
In this step, you see the last connected device and reconnect to it.
8
OPERATION
48
O P E R A T I N G I N S T R U C T I O N S | Ranger3
8020774/14IM/2019-07 | SICK
Subject to change without notice