![background image](http://html.mh-extra.com/html/sick/ranger3/ranger3_operation-instructions-manual_1263837038.webp)
7.13.2
Image format control
Table 11: Image format control standard SFNC selectors
Selector
Type
Description
Visibility
RegionSelector
enum
Selects the Region of interest to control.
Values:
Region0
Region1
Scan3dExtraction1
Beginner
ComponentSelector
enum
Selects a component to activate/deactivate its data
streaming.
Values:
Intensity, Range, Reflectance, Scatter
Expert
Table 12: Image format control standard SFNC parameters
Parameter
Type
Description
Visibility
Access
ExposureTime[RegionSelector]
1
float
Sets the Exposure time (in
μ
s).
Beginner
R(W)
Width[RegionSelector]
int
Width of the image provided by the device (in pixels).
Beginner
R(W)
Height[RegionSelector]
int
Height of the image provided by the device (in pixels).
Beginner
R(W)
OffsetX[RegionSelector]
int
Horizontal offset from the origin to the region of interest
(in pixels).
Beginner
R(W)
OffsetY[RegionSelector]
int
Vertical offset from the origin to the region of interest
(in pixels).
Beginner
R(W)
RegionMode[RegionSelector]
enum
Controls if the selected region of interest is active and
streaming.
Values:
Off
On
Expert
R
ComponentEnable[RegionSelec‐
tor][ComponentSelector]
bool
Controls if the selected component streaming is active. Expert
RW
PixelFormat[RegionSelector][Com‐
ponentSelector]
enum
Format of the pixels provided by the device.
Values:
Mono8, Coord3D_C8, Mono12p, Mono16,
Coord3d_C16
Expert
R(W)
TestPattern[RegionSelector][Com‐
ponentSelector]
enum
Selects the type of test pattern that is generated by the
device as image source.
Values:
Off
GreyHorizontalRampMoving
Expert
R(W)
RegionIDValue[RegionSelector]
int
The unique identifier value corresponding to the
Region.
Expert
R
ComponentIDValue[ComponentS‐
elector]
int
The unique identifier value corresponding to the
selected Component type.
Expert
R
1
According to GeniCam
™
SFNC, the
ExposureTime
parameter belongs to the
AcquisitionControl
category. Here it is moved to the
ImageFormat‐
Control
category because it is selected by the
RegionSelector
parameter.
Table 13: Image format control custom parameter
Parameter
Description
Visibility
Access
RegionDescription[RegionSelector]
Describes the usage of a specific region in the device.
Beginner
R
7
CONFIGURATION
38
O P E R A T I N G I N S T R U C T I O N S | Ranger3
8020774/14IM/2019-07 | SICK
Subject to change without notice