Ethernet connections
Figure 6: Ethernet connections
Port 1: 100 MBit/s
Port 2: 1 GBit/s
Port 3: 100 MBit/s
Port 4: 1 GBit/s
5.3.3.3
Connecting peripheral devices
The device can be connected to a wide range of sensors and cameras.
The required pin assignments can be found in the data sheets for the peripherals to be
connected as well as in the relevant connection descriptions.
•
Connect the cables to peripheral devices.
•
Route the cables to the device using installation materials (cable channels, cable
ties, etc.). When doing so, pay attention to cable strain relief.
•
Connect cables to the relevant device connections and screw together tightly.
Further topics
•
"Pin allocations of the connections", page 12
5
ELECTRICAL INSTALLATION
14
T E C H N I C A L I N F O R M A T I O N | LiDAR Localization Hardware Integration
8024819/2019-09-02 | SICK
Subject to change without notice
