SAFETY INFORMATION
2
8024534 / / 2019-08-19
Operating Instructions | InspectorP Rack Fine Positioning
7
2
Safety information
2.1
Intended use
InspectorP Rack Fine Positioning is suited for storage and conveyor applications in
which precise positioning of automated storage and retrieval systems is required when
putting goods into and taking them out of storage.
The management, commissioning and operation of the device is done on a PC by using
the SICK AppManager and SOPASair software. The device sends results to a higher-
level control (e.g. PLC) in order to coordinate further processing via the host interface.
SICK AG assumes no liability for losses or damage arising from the use of the product,
either directly or indirectly. This applies in particular to use of the product that does
not conform to its intended purpose and is not described in this documentation.
2.2
Inappropriate use
Any use outside of the stated areas, in particular use outside of the technical specifi-
cations and the requirements for intended use, will be deemed to be incorrect use.
•
The device does not constitute a safety component in accordance with the respec-
tive applicable safety standards for machines.
•
The device must not be used in explosion-hazardous or corrosive areas or under ex-
treme ambient conditions.
•
Any use of accessories not specifically approved by SICK AG is at your own risk.
WARNING
Danger due to improper use!
Any improper use can result in dangerous situations.
Therefore, observe the following information:
•
Device should be used only in accordance with its intended use.
•
All information in these operating instructions must be strictly observed.
2.3
Internet protocol (IP) technology
NOTE
SICK uses standard IP technology in its products. The focus is on availability of
products and services.
SICK always assumes the following prerequisites:
•
The customer ensures the integrity and confidentiality of the data and rights
affected by its own use of the aforementioned products.
•
In all cases, the customer implements the appropriate security measures,
such as network separation, firewalls, virus protection, and patch manage-
ment.
2.4
Limitation of liability
Relevant standards and regulations, the latest technological developments, and our
many years of knowledge and experience have all been taken into account when com-
piling the data and information contained in these operating instructions. The manu-
facturer accepts no liability for damage caused by:
