2
Device status in read mode
Distance displays
•
Product type V2D61xx-x
M
xxxx: The distance display supports adjustment of the
focus position with the focus adjustment tool. The LEDs indicate the working
distance and the set focus position.
Device status
Display
LED
(green)
LED
(red)
LED
(yellow)
Status
Ready
O
o
-
The device is ready for use.
o
O
-
The device is not ready for use (hardware fault or soft‐
ware error).
Result
O
o
-
The read is successful.
o
O
-
The read is not unsuccessful.
Light
O
-
-
Read mode: illumination on, internal reading interval
open
U-Def
-
-
O
Data output via the host interface
L/A Eth
Ö
-
-
Data traffic via the Ethernet interface
O
= lights up;
Ö
= flashes;
o
= does not light up
PROFINET operation (single port)
The
Ready
status LED signals the device status in the PROFINET network.
Ready
LED
Device status
Remarks
Green com‐
ponents
Red compo‐
nents
O
o
Device is ready for use.
O
Ö
Flashes
every
0.5 seconds.
PROFINET is activated in
the device. The device is
not connected to the PRO‐
FINET IO controller (PLC)
or the device is not config‐
ured.
To not use PROFINET, deactivate
PROFINET.
In the default configuration of the
device, automatic PROFINET network
detection is activated. This detects
during startup whether the device is
in a PROFINET environment and acti‐
vates PROFINET automatically.
To apply the changed settings, per‐
manently save the changes and
restart the device.
Ö
Ö
The
flashing
function is acti‐
vated via the configuration
software.
The red and green components of
the LED flash alternately.
Prerequisite: PROFINET is activated
in the device.
O
= lights up;
Ö
= flashes;
o
= does not light up
Further topics
•
Adjusting focus with the focus adjustment tool
3.6
Function and use
The device localizes automated guided vehicles (AGVs) by means of 2D codes.
PRODUCT DESCRIPTION
3
8026021/1D2S/2022-09-01 | SICK
O P E R A T I N G I N S T R U C T I O N S | GLS611
15
Subject to change without notice
