SICK DME4000, Operating Instructions Manual

Page: 118 / 129

Chapter 9 Operating Instructions
DME4000
118 © SICK AG • Germany • Subject to change without notice 8014584/ZN33/2017-07
Appendix
Parameter
ID Parameter Current Value Chapter 3 Menu
1
Position Value 7295 counts
2 COS/Delta 0 counts Anhang 0
3 Position State
Register 0 counts See DeviceNet
Specification
4
Position Low
Limit 0 counts See DeviceNet
Specification
5
Position High
Limit 0 counts See DeviceNet
Specification
6 Offset Value 0 counts 3.6
7 Resolution 100
µ
m 3.5
8
Serial Mode
Baudrate 19200 3.2.1
9
Serial Mode
Data 8n1 3.2.2
10 Plausibility Off 3.7
11 MF1 ActiveState High 3.3.1
12
MF1 Function Distance 3.3.2
13
MF2 ActiveState High 3.4.1
14 MF2 Function Service 3.4.2
15 Service MF1 1101110 3.3.4
16
Service MF2 1101110 3.4.4
17
MF1 Temperature
UpperLimit 70
°
C 3.3.4.3
18 MF1 Temperature
LowerLimit 0
°
C 3.3.4.4
19 MF2 Temperature
UpperLimit 70
°
C 3.4.4.3
20
MF2 Temperature
LowerLimit 0
°
C 3.4.4.4
21
MF1 Distance
UpperLimit 2000 mm 3.3.3.1
22 MF1 Distance
LowerLimit 1990 mm 3.3.3.2
23 MF2 Distance
UpperLimit 2000 mm 3.4.3.1
24
MF2 Distance
LowerLimit 1990 mm 3.4.3.2
Parametrisation of MF1 and MF2
Device variants DME4000–xx5 are only equipped with a 5-pin DeviceNet plug. The multifunctional
inputs and outputs MF1 and MF2 are not available as hardware.
The parametrisation of MF1 and MF2 is nevertheless possible, and the result can be queried in the
diagnostic byte (see Section 9.6.3 “Data Exchange”) via the bus.
Parametrisation as an input is not possible. The sleep mode and preset functions are possible via the
“Class Instance Editor”.

CAUTION