SICK CLV 490 Operating Instructions Manual Download Page 86

Page: 86 / 214

Chapter

Operating Instructions

CLV 490 Bar Code Scanner

6-20

8 008 796/0000/25-06-2002

Operation

Displaying the reading result in the Terminal Emulator:

Click

in the toolbar.

The Terminal Emulator window is then displayed.

In the D

EVICE

MODE

section, choose R

EADING

ODE

Present the bar code pattern from

Fig. 6-1

to the CLV and activate the reading pulse.

The "Sensor" LED lights up and the scan line appears. Also refer to

Chapter 6.3.1 Swit-

ching the CLV on for the first time with the factory default settings, Page 6-3

Ending the reading pulse.

The CLV displays the reading result in the output window of the Terminal Emulator.

The "Read Result" LED lights up for a duration of 100 ms (default setting).

Fig. 6-6

shows two examples of the output of a reading result: Good Read and No Read.

The reading result comprises the data contents of the bar code(s) and the reading diagnosis

data.

Fig. 6-7

explains the structure and function of the reading diagnosis data for Good

Read, and

Fig. 6-8, Page 6-21

for No Read.

Fig. 6-6:

CLV-Setup: Displaying the reading result in the Terminal Emulator

Summary of Contents for CLV 490




















































































































































































































Search results

Summary of Contents for CLV 490

Reviews:

Related manuals for CLV 490

Brands by name

Popular brands

SICK CLV 490, Operating Instructions Manual

Search results

Summary of Contents for CLV 490

Reviews:

Related manuals for CLV 490

Brands by name

Popular brands