4.
Push the series-connected devices onto the 5-pin connection on the left side of
the device. Make sure that the sequence is correct.
1)
5.
Fix the connected devices on the mounting rail without any spaces.
5.5
Connecting the device
NOTE
Switch the power supply off before you connect or replace the devices.
1.
Connect
2)
the male M12 D-coded connector for the PROFINET network to the
PROFINET connection on the device and secure it using the sleeve nut.
2.
Connect the female M8 connector on the power supply to the underside of
the device and screw the male connector tight.
1)
see the operating instructions for the relevant device
2)
AOD1 devices on left side of WI180C-PN. WLL180T devices on left side of AOD.
5
MOUNTING
12
O P E R A T I N G I N S T R U C T I O N | WI180C-PN
8023551/11HP/2019-03-07 | SICK
Subject to change without notice
