656 229
2010-11-22
|
Sicam snc società unipersonale
36 | SBM 855 | Operation
en
7. Operation
i
After switching on the SBM 855 the software version
appears on the displays of the control/display panel
for a few seconds. The two displays then show the
value
0
.
r E L.
1.19
7.1 Control/display
panel
7.1.1
Overview of LEDs
651009-04 _Cv
1
3
5
6
7
8
9
10
11
2
4
12
Fig. 4:
LEDs on control/display panel
Item Description
1
Display of active (selected) balancing program and
balancing positions (refer to Section 7.2)
2
Rim diameter display
3
Balancing location display,
lights in green on attaining balancing position
4
Matching program display, lights when matching pro-
gram is active
5
Split program and matching program display, lights if
programs are active (refer to Section 8.4.2/ and
Section 9)
6
Rim width display
7
Display of distance from SBM 855
8
Display of unit for rim width and rim diameter
lit = mm
not lit = inch
9
Operator selection display
10
Balancing program display,
lights if pax program selected
11
Display of direction to be turned for balancing position
up = turn clockwise
down = turn counter-clockwise
12
Indicator for wheel to be balanced
lit = passenger vehicle wheel
not lit = commercial vehicle wheel
7.1.2 Control
keys
1
2
3
5
6
8
9
10
651009-05_Cv
11
7
4
Fig. 5:
Control/display panel keys
Item
Key
Description
1
<
MENU
>
Performance of basic settings and confir-
mation of data input.
2
<
MAT-
CHING
>
Selection of matching program (unbalan-
ce minimization).
3
<
SPLIT
>
Call-up and termination of program for
splitting balance weights.
4
<
START
>
Start of measurement.
5
<
STOP
>
End of measurement,
blocking of SBM 855 in an emergency.
6
<
OK
>
Confirmation of data input
7
<
-
> or <
+
>
Alteration of values for rim distance, rim
diameter and rim width.
8
<
mm/inch
>
Selection of unit for manual input of rim
diameter and rim width.
No function for rim distance.
9
<
Operator>
Operator selection
10
<
MODE
>
Selection of balancing program.
11
<
Wheel ty-
pe
>
Passenger vehicle / commercial vehicle
wheel switching
Tab. 1:
Function of keys
7.2 Balancing
programs
Button
Standard program for clip-on weights
Alu1: Standard program for adhesive
weights
Alu2: Concealed adhesive weights
Alu3: Inside clip-on weights /
outside concealed adhesive weights
Alu4: Inside clip-on weights /
outside adhesive weights
Alu5: Inside adhesive weights /
outside clip-on weights
Static balancing on level 1
Static balancing on level 2
Static balancing on level 3
Pax1: (Pax rim) for adhesive weights
Pax2: (Pax rim) for concealed adhesive
weights
