656 229
2010-11-22
|
Sicam snc società unipersonale
Symbols used | SBM 855 | 27
en
1. Symbols
used
1.1
In the documentation
1.1.1
Warning notices - Structure and meaning
Warning notices indicate hazards and their consequen-
ces for the user or surrounding persons. Warning notices
also describe the measures for preventing these hazards.
The signal word has a crucial importance. It indicates
the probability of occurrence and the severity of the
hazard in case of non-compliance:
Signal
word
Probability of
occurrence
Severity of danger
if instructions not
observed
DANGER
Immediate
impending
danger
Death
or
severe
injury
WARNING
Possible
impending
danger
Death
or
severe
injury
CAUTION
Possible
dangerous
situation
Minor
injury
Below you will see an example of the “Live parts”
warning notice by way of example, with the signal word
DANGER
:
DANGER – Exposure of live parts on open-
ing the SBM 855!
Risk of (fatal) injury or heart failure from elec-
tric shocks on contact with live components
(e.g. master switch, printed circuit boards).
Work on electrical installations or equip-
ment is only to be performed by qualified
electricians or trained personnel under the
guidance and supervision of an electrician.
Disconnect SBM 855 from the mains be-
fore opening.
1.1.2
Symbols in this documentation
Sym-
bol
Designation
Explanation
!
Attention
Warns about possible property damage.
i
Information
Practical hints and other
useful information.
1.
2.
Multi-step op-
eration
Instruction consisting of several steps
e
One-step oper-
ation
Instruction consisting of one step.
Intermediate
result
An instruction produces a visible inter-
mediate result.
"
Final result
There is a visible final result on comple-
tion of the instruction.
1.2
On the product
!
Observe all warning notices on products and ensure
they remain legible!
Direction of wheel rotation
Wheel must turn in direction indicated.
(see chapter 4.6 )
DANGER – Exposure of live parts on ope-
ning the SBM 855!
Risk of (fatal) injury or heart failure from elec-
tric shocks on contact with live components
(e.g. master switch, printed circuit boards).
Work on electrical installations or equip-
ment is only to be performed by qualified
electricians or trained personnel under the
guidance and supervision of an electrician.
Disconnect the SBM 855 from the mains
before opening.
Disposal
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
