Sicam SBM 55 NW, Original Instructions Manual

Page: 50 / 160

1 695 656 076 2012-03-28
|
Sicam srl società unipersonale
50 | SBM 55 NW | Settings en
10. Settings
10.1 User settings
i
Settings which can be made by the user.
1. Keep the < MENU > key pressed for 3 seconds.
2. As soon as SET appears in the left-hand display, release the < MENU > key.
"
TOL appears in the left-hand display and the current value in the right-hand display.
"
To scroll press < MENU >
Function Key
Change of setting/value <-> or <+>
Access to next setting, altered settings are stored < OK > or < MENU >
Exit from menu.
Attention: Altered setting is however stored
< STOP >
Setting Left display Right display Description
Tolerance for display value "0" TOL Current value in
grams / ounces
Entry of balance weight value below which the value "0" is to
be displayed.
Standard value 4,5 g (0,25 oz), maximum value 25 g (0,25 oz)
Display resolution
Balance weight
RES
1 or 5 5 g / 0.25 oz - Standard resolution
1 g / 0.05 oz - Fine resolution
Unit for balance weight UNB GRA
OUN
GRA = Display in grams
OUN = Display in ounces
Acoustic signal SND
ON
OFF
ON = An acoustic signal sounds on storing the data
determined
OFF = No acoustic signal sounds on storing the data
determined
Automatic start CAR ON
OFF
ON = Start of measurement by closing wheel guard
OFF = Start of measurement by pressing <START> key
(with wheel guard closed)
Data arm selection MOT ON
OFF
ON = Use is made of standard data arm
OFF = Use is made of long data arm for balancing of
motorcycle wheels
Setting not possible, always select OFF
10.2 Basic settings
i
Basic settings which can only be made following consultation with or by customer service.
1. Press and hold the < MENU > key.
2.
As soon as
SET
appears in the left-hand display, release the <
MENU
> key.
3. Press the < mm/inch > key within 1.5 seconds.
"
POT appears in the left-hand display and the current setting in the right-hand display.
i
This gains access to the factory setting menu, reserved to technical assistance.
"
To exit press < SPLIT >