Reel holding carriage (M)
IDM 510-129-1
48
English language
Operation and maintenance manual
▀
Film Coil Feeding
1.
Lower the reel holding carriage
until its endstroke.
2.
Lift the lever
F
to its vertical po-
sition.
3.
Remove the cardboard core of
the reel.
4.
Insert the new reel.
Check whether the wrapping
film has the same chemi-
cal-physical properties as that
installed in the reel holder car-
riage.
If film characteristics appear to
be different, consider whether
you should adjust the film ten-
sion.
5.
Insert film according to the re-
quired direction of the adhesive
size.
Important
In order to avoid transferring impurities to the surfaces of the guiding rollers,
discard the outer wrapping film layer on the reel.
6.
Tie the trailing end of the film to the base of the product to be wrapped.
7.
Start wrapping.
8.
Lower the lever
F
to its horizontal position after the platform has completed at
least one turn.
Summary of Contents for ProWrap 16_H_FM
Page 14: ...Safety information IDM 510 004 5 12 English language Operation and maintenance manual...
Page 84: ...Control system IDM 510 140 0 82 English language Operation and maintenance manual...
Page 102: ...Disposal and scrapping IDM 510 106 0 100 English language Operation and maintenance manual...
