IDM 510-140-0
Control system
91
English language
Operation and maintenance manual
–
Double mode:
the wrapping stops automatically with the reel holder carriage at
the starting point (lower side of the load).
10.
Manually cut the film and cause it to adhere to the wrapped product.
Important
Keep the reel suitably refilled to prevent to avoid interrupting the wrapping
due to absence of film.
11.
Remove the wrapped product to be able to load the next one to wrap.
12.
Correctly load the new product to be wrapped in the middle of rotating platform.
– With a product having the same features, press button
B
to start the wrapping
cycle.
– Wrapping is carried out in the same modes.
▀
Normal stop
– Make sure that the wrapping process has been completed.
–
DO NOT control a machine stop if the wrapping cycle has not been com-
pleted.
– Manually cut the film and cause it to adhere to the wrapped product.
– Remove the wrapped product.
– Rotate electric selector
G
to position
“O”
(OFF).
Summary of Contents for ProWrap 16_H_FM
Page 14: ...Safety information IDM 510 004 5 12 English language Operation and maintenance manual...
Page 84: ...Control system IDM 510 140 0 82 English language Operation and maintenance manual...
Page 102: ...Disposal and scrapping IDM 510 106 0 100 English language Operation and maintenance manual...
