Reel holding carriage (FM)
IDM 510-129-1
56
English language
Operation and maintenance manual
▀
Replacing the outer surface of roller
–
The operation must be carried out by the maintenance technician or by
personnel with suitable competences, skills and knowledge.
–
Make sure to fulfil the required requirements in order to work under safe
conditions.
–
This service should be carried out with the reel holding carriage lowered
and the machine safely at a stop.
1.
Loosen the screws
A
.
2.
Disassemble the brake assem-
bly
B
.
3.
Remove in a sequence the
components
C-D-E
.
4.
Unscrew screw
F
.
5.
Unscrew the nuts
G
.
6.
Remove the plate
H
.
7.
Extract spacer
L
.
8.
Remove stop ring
M
.
9.
Remove the component
N
.
10.
Remove all the external cylin-
der surface inserts
P
, one at a
time.
11.
Thoroughly clean the grooves
of the roller.
12.
Insert in a sequence, one at a
time, all the new external cylin-
der surface inserts.
13.
Install component
N
.
14.
Reinstall the retainer ring
M
.
15.
Install the spacer
L
.
16.
Fit back the plate
H
and fix it
with the nuts
G
without tighten-
ing.
17.
Insert screw
F
and tighten it.
18.
Adjust the position of the plate
H
and tighten the nuts
G
.
19.
Install in a sequence the components
E-D-C
.
20.
Install the brake assembly
B
and fix it with the screws
A
.
–
At the end of operations, check that there are no tools or other material
near the moving parts or in dangerous areas.
21.
Start the machine and make sure that the operation has been carried out proper-
ly.
Summary of Contents for ProWrap 16_H_FM
Page 14: ...Safety information IDM 510 004 5 12 English language Operation and maintenance manual...
Page 84: ...Control system IDM 510 140 0 82 English language Operation and maintenance manual...
Page 102: ...Disposal and scrapping IDM 510 106 0 100 English language Operation and maintenance manual...