- 37 -
IR Connector (J5)
If you have an Infrared device, this mainboard can implement IR transfer
function. To enable the IR transfer function, follow these steps:
Pins Assignment:
1=NC
2=KEY
3=+5V
4=GND
5=IRTX
6=IRRX
Note:
Before connect your IR device, please be sure each IR on board pin
allocation is matched with the pin of the IR device. Otherwise,
incorrect IR connection may damage your IR device.
Step 1.
Attach the 6-pin infrared device cable to J5 connector.
(Refer to the above diagram for IR pin assignment.)
Step 2.
This mainboard only support normal transfer mode.
E3
IR
1
J5
4
1
2
3 5
6
