Shuttle Spacewalker MV25 User Manual Download Page 60

Page: 60 / 84

- 58 -

Advanced BIOS Features

This section allows you to configure your system for basic operation.

You have the opportunity to select the system's default speed, boot-

up sequence, keyboard operation, shadowing, and security.

Virus Warning

Allows you to choose the VIRUS Warning feature for IDE Hard Disk

boot sector protection. If this function is enables and someone at-

tempts to write data into this area, BIOS will show a warning message

on screen, and an alarm beep.

Enabled

Activates automatically when the system boots up,

causing a warning message to appear when anything

attempts to access the boot sector or hard disk

partition table.

Disabled

No warning message will appear when anything

attempts to access the boot sector or hard disk parti-

tion table.

The choice: Enabled or Disabled.

CPU Internal Cache

This item enables CPU internal cache to speed up memory access.

The choice: Enabled or Disabled.

Summary of Contents for Spacewalker MV25





















































































Search results

Summary of Contents for Spacewalker MV25

Reviews:

Related manuals for Spacewalker MV25

Brands by name

Popular brands

Shuttle Spacewalker MV25, User Manual

Search results

Summary of Contents for Spacewalker MV25

Reviews:

Related manuals for Spacewalker MV25

Brands by name

Popular brands