Shuttle Spacewalker MV25 User Manual Download Page 63

Page: 63 / 84

- 61 -

Note:To disabled security, select PASSWORD SETTING at Main

Menu, and then you will be asked to enter password. Do not

type anything and just press <Enter>; it will disable security.
Once the security is disabled, the system will boot, and you

can enter Setup freely.

APIC Mode

This item allows you to enable/disable the APIC mode.

The choice: Enabled or Disabled.

MPS Version Control For OS

This item allows you select ACPI MPS version.

The choice: 1.1 or 1.4.

OS Select For DRAM > 64MB

Selects the operating system that is running with greater than 64MB

of RAM in the system.

The choice: Non-OS2 or OS2.

Video BIOS Shadow

Determines whether video BIOS will be copied to RAM. However,

it is optional depending on chipset design. Video Shadow will

increase the video speed.

The choice: Enabled or Disabled.

XX000-XXFFF Shadow

These categories determine whether option ROMs will be Chipset

Feature Setup Auto Configuration copied to RAM. An example of

such option ROM would be support of on-board SCSI.

The choice: Enabled or Disabled.

Small Logo(EPA) Show

This item allows you to enable/disable the EPA Logo.

The choice: Enabled or Disabled.

Summary of Contents for Spacewalker MV25





















































































Search results

Summary of Contents for Spacewalker MV25

Reviews:

Related manuals for Spacewalker MV25

Brands by name

Popular brands

Shuttle Spacewalker MV25, User Manual

Search results

Summary of Contents for Spacewalker MV25

Reviews:

Related manuals for Spacewalker MV25

Brands by name

Popular brands