- 50 -
Quick Power On Self Test
Enable this item to shorten the power on testing (POST) and have your
system start up faster. You might like to this item after you are confident
that your system hardware is operating smoothly.
Ø
The choice: Enabled or Disabled.
First/Second/Third Boot Device
Use these three items to select the priority and order of the devices that
your system searches for an operating system at start-up time.
Ø
The Choice: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-
2, HDD-3, ZIP100, USB-FDD, USB-ZIP,USB-CDRAM, USB-HDD,
LAN, or Disabled.
Boot Other Device
If you enable this item, the system searches all other possible locations
for and operating system if it fails to find one in the devices specified
under the First, Second, and Third boot devices.
Ø
The choice: Enabled or Disabled.
Swap Floppy Drive
If you have two floppy diskette drives in your system, this item allows
you to swap the assigned drive letters so that drive A becomes drive B,
and drive B becomes drive A.
Ø
The choice: Enabled or Disabled.
Boot Up Floppy Seek
If this item is enabled, it checks the size of the floppy disk drives at start-
up time. You don't need to enable this item unless you have a legacy
diskette drive with 360k capacity.
Ø
The choice: Enabled or Disabled.
Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your
system is started.
Ø
The choice: Off or On.
Gate A20 Option
This item defines how the system handles legacy software that was
written for an earlier generation of processors. Leave this item at the
deafult value.
Ø
The choice: Normal or Fast.
