- 60 -
WOR(RI#) From Soft-Off
If this item is enabled, it allows the system to resume from a software
power down or power-saving mode whenever there is an incoming call
to an installed fax/modem. You have to connector the fax/modem to
the mainboard.
Ø
The choice: Enabled or Disabled.
USB Resume From S3
If you are using a USB keyboard, and the ACPI suspend type is set to
S3, you can enable this item to allow a keystroke to wake up the system
from power saving mode.
Ø
The choice: Enabled or Disabled.
Power-On by Alarm
When set to Enabled, the following three fields become available and
you can set the hour, minute and second to turn on your system.
Ø
The choice: Enabled or Disabled.
Time(dd : hh : mm) of Alarm
This item selects the alarm Time.
[dd]
Ø
Key in a DEC number: Min=0, Max=31.
[hh]
Ø
Key in a DEC number: Min=0, Max=23.
[mm]
Ø
Key in a DEC number: Min=0, Max=59.
PS2 Keyboard Power ON
Set a password or a key to awaken the system from a keyboard.
Ø
The choice: Disabled, Password, or Hot KEY.
KB Power ON Password
Press <Enter> to set a password to awaken the system from a key-
board.
Hot Key Power ON
Set a key to awaken the system from a keyboard.
Ø
The choice: Any Key or Ctrl-F1~F12.
PS2 Mouse Power ON
Enable or disable the function of awakening the system from a mouse.
Ø
The choice: Enabled or Disabled.
PWRON After PWR-Fail
This item allows you to select power on function when power fail.
Ø
The choice: Off, On, or Former-Sts.
