- 56 -
IDE DMA transfer access
Internal PCI/IDE field, above, is Disabled.
Ø
The choice: Enabled or Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or mul-
tiple sector read/write. If your IDE hard drive supports block mode(most
new drivers do), select Enabled for automatic detection of the optimal
number of block read/write per sector the drive can support.
Ø
The Choice: Enabled or Disabled.
Onboard PCI Device
Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.
Init Display First
This item is used to determine initial device when system power on.
Ø
The choice: Onboard/AGP or PCI Slot.
OnChip USB
This should be enabled if your system has a USB installed on the system
board and you want to use it.
Ø
The choice: Disabled, V1.1+V2.0, or V1.1.
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus(USB)
controller and you have a USB keyboard.
Ø
The Choice: Enabled or Disabled.
OnChip Audio
This item allows you to control the onboard Audio.
Ø
The Choice: Auto or Disabled.
OnChip Lan
This item allows you to set the the onboard Lan.
Ø
The Choice: Auto or Disabled.
Onboard Super IO Device
Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.
Onboard FDC Controller
This item specifices onboard floppy disk drive controller. This setting
allows you to connect your floppy disk drives to the onboard floppy
connector.
Ø
The choice: Enabled or Disabled.
