- 38 -
E8
IR Header (JP4)
If you have an Infrared device, this mainboard can implement IR transfer
function. This mainboard supports Normal, IrDA, ASKIR, or SCR transfer
mode. To enable this function, attach a 6-pin infrared device cable to the IR
(JP4) header. Please note that every pin is properly allocated. If not, your IR
device may be damaged.
Pin Assignments:
1=NC
2=KEY
3=POWER (5V)
4=GND
5=IRTX
6=IRRX
AGP Protection LED (D1)
The mainboard provides one 1.5V AGP card
which supports up to 8X. If you plug the 3V
AGP card on the mainboard, the AGP Protec-
tion LED will flash and you can't turn on the
computer.
CPU Overtemperature LED (D30)
When CPU temperature over 85
0
C, the
system will cut off the power supply directly,
and the CPU Overtemperature LED will flash.
You must remove AC Power and check the
CPU and heatsink are securely fastened well.
E9
E10
IR
JP4
1
1 3 5
2 4 6
CPU Overtemperature LED
D30
AGP Protection LED
D1
