manualshive.com logo in svg

Shuttle MN31L, User Manual

Share
Download
Shuttle MN31L User Manual Download Page 8

- 2 -

Back-Panel Connectors

PS/2 Keyboard & PS/2 Mouse Connectors ................................................ 27

VGA Port Connectors ................................................................................ 27

Parallel Port Connector .............................................................................. 27

Line-Out Port Connector ............................................................................ 27

Line-In (Shared with Rear-Out) Port Connector ........................................... 27

Mic-In (Shared with Center/Bass-Out) Port Connector ................................ 28

MIDI/Game Port Connector ........................................................................ 28

USB1/USB2 Port Connectors .................................................................... 28

LAN Port Connector ................................................................................... 28

Front-Panel Connectors

HDD LED Connector (HLED) .................................................................... 29

Green LED Connector (GLED) .................................................................. 29

Hardware Reset Connector (Reset) ........................................................... 30

ATX Power On/Off Switch Connector (PWON) ........................................... 30

EPMI Connector (EPMI) ............................................................................. 31

Power LED Connector (PLED) .................................................................. 31

Speaker Connector (Speaker) ................................................................... 31

Front-Panel Audio Header (JP9) ................................................................ 32

Extended USB Headers (JP2/JP3) ............................................................ 32

Internal Peripheral Connectors

Enhanced IDE and Floppy Connectors (IDE1/IDE2 & FLP1) ...................... 33

Other Connectors

ATX Power Supply Connectors (CN2/CN3) ................................................ 34

CPU and System Fan Connectors (FAN1/2/3)............................................ 35

Audio Center/Bass Header (JP5)............................................................... 35

SPDIF Ext. Header (JP7) ........................................................................... 36

Audio CD_IN Connectors (JP6/JP8) .......................................................... 36

Audio AUX_IN Connector (JP10)(White) .................................................... 37

Serial Port Connectors (COM1/COM2) ...................................................... 37

IR Header (JP4) ......................................................................................... 38

AGP Protection LED (D1) .......................................................................... 38

CPU Overtemperature LED (D30) ............................................................. 38

Summary of Contents for MN31L








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands