- 59 -
Min Saving
Minimum power management.
Suspend Mode=1 hr.
Max Saving
Maximum power management.
Suspend Mode=1 min.
User Define
Allows you to set each mode individually.
Suspend Mode= Disabled or 1 min ~1 hr.
Ø
The choice: Min Saving, Max Saving, or User Define.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video
buffer.
DPMS Support
Initial display power management signaling.
Ø
The choice: V/H SYNC+Blank, Blank Screen, or DPMS Support.
HDD Power Down
The IDE hard drive will spin down if it is not accessed within a specified
length of time. Options are from 1 Min to 15 Min and Disabled.
Ø
The choice: Disabled or 1 Min~15 Min.
HDD Down In Suspend
The item allows you to enable or disable the HDD Down In Suspend.
Ø
The choice: Enabled or Disabled.
Soft-Off By PBTN
Pressing the power button for more than 4 seconds forces the system to
enter the Soft-Off state when the system has " hung".
Ø
The choice: Delay 4 Sec or Instant-Off.
WOL(PME#) From Soft-Off
If this item sets to Enabled, the system power will be turned on when the
LAN port receives an incoming signal. You have to connect the fax/
modem to the mainboard Wake-On-LAN connector for this feature to
work.
Ø
The choice: Enabled or Disabled.
