- 8 -
4. Then the system will ask
Did you want Windows to search for
your new hardware?
Please select
No, I want to select the hardware
from a list.
then click
Next
to continue.
5. In the follow-on window of device types, select
SCSI
and
RAID
controllers
, then click
Next
to continue.
6. In the follow-on window, select
Have Disk....
7. Please insert the CD disk of driver and input path name
D:\RAID\Win2k
into
Copy manufacturers files from:
column, then
click
OK
.
8. In the follow-on type column, select
HPT372 UDMA/ATA133 RAID
Controllers
.
9. Follow the system prompt to finish the installation, and restart the
computer.
6
Install driver in the process of Windows 2000 installation
1. If Windows 2000 is installed from the CD-ROM drive, please
F6
key
when the message
Press F6 if you need to install third party SCSI or
RAID driver
appears. If it is to type
Winnt
and install, after files have
been copied and the computer restarted, press
F6
key when the
message
Setup is inspecting your computers hardware configura-
tion
appears.
2. Press
S
key to specify additional devices when the
Windows 2000
Setup
window appears.
3. In the follow-on window of device type, please select
Other
and
press
Enter
to continue.
4. Insert the CD disk of driver, then press
Enter
to continue.
5. The system will ask whether to install driver under
WinNT
or under
Windows 2000
, please select to install driver under
Windows 2000
.
6. The follow-on interface will list the devices to be installed, in which
HPT372 UDMA/ATA133 RAID Controller
item should be included.(
If users want to install other devices,please operate at this time. If all
devices have been successfully installed, please go to next.)
7. Press
Enter
to continue Windows 2000 setup.
