- 30 -
4.2 Create RAID
The following steps shall be taken to create RAID in BIOS.
1. Use the arrow key to select
1. Create RAID
.
2. Press
Enter
to confirm and go to next.
3. Select
1. Array Mode
in the popup subinterface and press
Enter
.
4. Select the intended RAID level in the popup selection box and press
Enter
.
5. Select
2. Select Disk Drives
in the previous subinterface and press
Enter
.
6. Select the disks to be used for creating the disk array and press
Enter
to confirm in the channel status zone.
7. Select
3. Start Creation Process
.
8. Pay attention to the warning message, and press
Y
to finish creation.
Note:
1. If you have selected
Striping (RAID 0) for Performance
in the popup
subinterface after the operation of
1. Array Mode
, you should directly
go to
3. Strip Size 64K
and then select
4. Start Creation Process
. The
default strip size is
64K
.
2. Different warning messages appear according to different RAID levels.
