- 7 -
2. If there is
HPT372 UDMA/ATA133 RAID Controller
item in the
popup window, it indicates that the driver has been successfully
installed. Otherwise, users need to reinstall the driver.
2.3 Windows 2000
6
Install driver under Windows 2000
Automatic Installation
Start the computer and enter the operating system of Windows 2000,
the system will automatically detect new hardware and prompt users to
install the driver. Please insert the CD disk of driver and follow the
system prompt to finish the driver installation and restart the computer.
Manual Installation
If Windows can not find new hardware, the driver shall be installed
through the following steps :
1. Click
Start
-->
Setup
-->
Control Panel
, select
Add/Remove New
Hardware
. In the follow-on window, Click
Next
to continue.
2. In the follow-on window, select the first item
Add/Troubleshoot a
device
, then click
Next
to continue.
3. In the follow-on device list, select the first item
Add New Device
,
then click
Next
to continue.
