12
1.
Link the units as shown in (figure 5), Connect a DMX signal cable from the first unit's DMX "out"
socket to the second unit's "in" socket. Repeat this process to link the second, third, and fourth
units.
2.
Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the
other end of the mains power cord into proper electric power supply sockets, starting with the first
unit. Do not supply power before the whole system is set up and connected properly.
Multiple Eventspots DMX Set Up with individual DMX addressing
DMX address 1 DMX Address 13 DMX Address 25 DMX Address 37
(TR16) (TR16) (TR16) (TR16)
Fig. 5
Note: Link all cables before connecting electric power
The Eventspot 1900 mkII has a total of 9 DMX channel configurations, referred to as
Personalities
.
The 9 personalities are [TOUR, ARC1, ARC1+D,ARC1+S, BLOCK].
Each of the different personalities can be accessed from the control panel.
