17
Activating an Auto Program
1.
Select the
AUTO
menu and press the
enter (D)
button.
2.
Use the
up (E)
/
down (F)
buttons to select an auto program (AT.01-10) or a custom program (PR.01-
10).
3.
Press
enter (D)
after selecting the desired auto program. You can set up the auto speed of the 10
built-in programs between 000-255. You can also edit 10 custom programs.
DMX 512 Address
1.
Select the
ADDR
menu and press the
enter (D)
button.
2.
Use the
up (E)
/
down (F)
buttons to set the DMX address. You can choose your DMX address
between 001-512.
Run Mode
1.
Select the
RUN
menu and press the
enter (D)
button.
2.
Use the
up (E)
/
down (F)
button to select the desired working mode:
•
DMX mode is used when working with a DMX512 controller to control the Eventspot or use the
Eventspot as master during a Master –Slave operation.
•
SLAVE mode is for using the device as a slave during a Master-Slave operation.
When the fixtures are in Auto program operation, the RUN MODE does not work.
