background image

 

Warning

 

 
 
 
 
 

Unpacking Instructions 

Immediately upon receiving this product, carefully unpack the carton and check the contents to 
ensure that all parts are present, and have been received in good condition. Notify the dealer 
immediately and retain packing material for inspection if any parts appear damaged from shipping or 
the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event 
that a fixture must be returned to the factory, it is important that the fixture be returned in the original 
factory box and packing. 

 

Your shipment includes: 

• Eventspot 1900 mkII

 

• User manual

 

 
 

LED Expected Lifespan 

LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the 
acceleration of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in 
ideal or singular optimum conditions. For this reason when all color LEDs are used at their fullest 
intensity, life of the LEDs is significantly reduced. It is estimated that a viable lifespan of 40,000 to 50,000 
hours will be achieved under normal operational conditions. If improving on this lifespan expectancy is 
of a higher priority, place care in providing for lower operational temperatures. This may include 
climatic-environmental and the reduction of overall projection intensity. 

 

Safety Instructions 

Every person involved with the installation, operation and maintenance of this device has to: 

-

 

be qualified 

-

 

follow the instructions of this manual 

 
 
 
 
 
 

Before your initial start-up, please make sure that there is no damage caused by transportation. 
Should there be any, consult your dealer and do not use the device. 
 
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to 
follow the safety instructions and warning notes written in this manual. 
 
Please consider that damages caused by manual modifications to the device are not subject to 
warranty. 
 
This device contains no user-serviceable parts. Refer servicing to qualified technicians only. 
 

IMPORTANT:

 

The manufacturer will not accept liability for any resulting damages caused by the 
non-observance of this manual or any unauthorized modification to the device. 

 

 

CAUTION! Be careful with your operations. 

With a dangerous voltage you can suffer 

a dangerous electric shock when touching the wires!

 

 

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY  

BEFORE YOUR INITIAL START-UP!

 

 

Summary of Contents for Eventspot 1900 MKII





























Reviews: