SHOWTEC 43548 User Manual Download Page 6

Page: 6 / 44

Spectral M3000 Zoom Q4 MKII IP65

Product code: 43548

Symbols and Signal Words

Safety notes and warnings are indicated throughout the user manual by safety signs.

Always follow the instructions provided in this user manual.

DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.

WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.

Attention

Indicates important information for the correct operation and use of the
product.

Important Read and observe the instructions in this document.

Electrical hazard

Provides important information about the disposal of this product.

Symbols on the Information Label

This product is provided with an information label. The information label is located on the mounting
bracket of the device.

The information label contains the following symbols:

This device shall not be treated as household waste.

This device falls under IEC protection class I.

Minimum distance from lighted objects.

Replace any cracked protective shield.

Caution: Risk of electric shock. Do not open.
Caution: To reduce the risk of electrical shock, do not remove cover. No user-
serviceable parts inside. Refer servicing to qualified personnel.

Summary of Contents for 43548













































Search results

Summary of Contents for 43548

Reviews:

Related manuals for 43548

Brands by name

Popular brands

SHOWTEC 43548, User Manual

Search results

Summary of Contents for 43548

Reviews:

Related manuals for 43548

Brands by name

Popular brands