28
Spectral M3000 Zoom Q4 MKII IP65
Product code: 43548
Reset
In this submenu you can restore the default factory settings of the device. This submenu requires a
password. The default password is pressing the UP/DOWN buttons in the following order: UP, DOWN, UP,
DOWN.
01)
Enter the password.
02)
Press the ENTER button to confirm the password and start the reset. During reset the display will show:
When the reset is completed, the display will show OK.
03)
Press any button to return to the main menu.
Note:
Calibration changes made in 6.6.9 Calibration cannot be reset.
Dimmer
In this submenu you can adjust the dimmer speed.
Select DIMMER and press the ENTER button to open the submenu.
Press the UP/DOWN buttons to choose one of the following options:
●
OFF: linear dimmer
●
DIM1-DIM 4: Dimmer speed, from fast to slow
Press the ENTER button to confirm your choice.
DMX Error
In this submenu you can determine the behavior of the device in case of a DMX failure.
01)
Press the UP/DOWN buttons select one of the following 2 options:
●
SAVE:
The device will use the last properly received DMX signal
●
BLACK:
The device will black out the light output
02)
Press the ENTER button to confirm your choice.
Zoom settings
In this menu you can select the zoom settings.
Press the UP/DOWN buttons to select one of the following 3 options:
●
BASE:
Zoom, basic position
●
POS1:
Zoom, 1
st
position
●
POS2:
Zoom, 2
nd
position
02)
Press the ENTER button to confirm the selection.
Summary of Contents for 43548
