ShowMagic AV, User Manual, Page: 61 / 233

1) First highlight the particular function fader that you wish to copy the settings from.
2) Press [F12] , the name of the function in question will be shown in the function display.
3) Press [1] to select fixture fader
001
(the fixture you are copying that function setting
from).
4) Press [/] [4] [-] [3] followed by [Enter] to copy that function setting from fixture 1 to
fixtures 2 & 4, but not fixture 3 - as the key inputs
[-] [3]
excluded fixture 3 from the
copy command.
d) To copy all of the function settings to the other three fixtures:
1) Press [F12] twice to select
Copy Fader
.
2) Press [1] to select fixture fader
001
(the fixture you are copying all the function settings
from).
3) Press [/] then [4] followed by [Enter] to copy all those function settings from fixture 1
through to
4
.
e) To copy all of the function settings to just fixture
3
:
1) Press
[F12]
twice to select
Copy Fader
.
2) Press
[1]
to select fixture fader
001
(the fixture you are copying all the function settings
from).
3) Press [*] then [3] followed by [Enter] to copy all those function settings from fixture 1 to
fixture 3.
Pressing [F12] three times will cancel the
Copy Fader
command in the function display.
Clearing Fixture / Function Settings using Commands
The [Delete] key (to the right of the [Enter] key on the main keyboard) can be used to clear down
function faders on one or more fixtures.
Please Note:
The
[Del]
key on the numeric keypad has a different function - being used to clear commands in the
function display - see below.
Example 1:
Highlighting a function fader, pressing [Delete] once followed by [1] [/] [4] [-] [2] [Enter] will clear
just that function on faders 1, 3 and 4.
Section 6 - Fixture Panel
49