manualshive.com logo in svg

ShowMagic AV, User Manual, Page: 223 / 233

Share
Download
ShowMagic AV User Manual Download Page 223

<audio>

    

<do> <timer>00:00:00</timer>

        

<01> volume[0,0] </01>

        

<02> volume[100,1.5] </02>

   

</do>

    

<do>  <timer>00:01:56</timer>

        

<01> volume[100,5] <01>

        

<02> volume[0,1.5] </02>

    

</do>

</audio>

In the example above, the first <do> instructions in the script, that are performed as soon as the 
event is started (at 00:00:00), will set the volume of audio 01 to 0% over 0 seconds, and set the 
volume of audio 02 to 100% (from its current level) over 1 and a half seconds.

The second <do> instructions in the script, that are performed 1 minute and 56 seconds after the 
event is started, will fade the volume of audio 01 up to 100% over 5 seconds, and fade the volume 
of audio 02 down to 0% over 1 and a half seconds.

You can also mix multiple instructions in a script - separated by a space - such as in the following:

<video>

    

<do>  <timer>00:00:10.00</timer>

        

<01> volume[0,0] alpha[0,0] </01>    

Note

: 

multiple instructions for each 

channel must be contained within the one pair of <nn> and </nn> markers.

        

<02> volume[100,1.5] alpha[100,2] </02>

    

</do>

</video>

In the example above, the <do> instructions in the script will, 10 seconds from when the multiple-
video event is started, set the volume of video file 01 to 0%, and set its brightness to 0%, over 0 
seconds. At the same time it will fade the volume of video file 02 to 100% (from its current setting) 
over 1 and a half seconds, and fade its brightness up (from its current setting) to 100%, over 2 
seconds.

Section 16 - Appendix

     211

Summary of Contents for AV










































































































































































































































Reviews:

No comments