manualshive.com logo in svg

ShowMagic AV, User Manual, Page: 188 / 233

Share
Download
ShowMagic AV User Manual Download Page 188

Please Note:

The 

Key Activated Presets

 item on the 

Options > Action Panel

 menu must also be ticked in 

order for this feature to work on the action panel.

Setting Editable Events for the User Screen

If the 

Options > User Screen Access >  Realtime Edit

 item is ticked, then a dark blue 

UE

 option 

will appear in the details displays for action buttons. You will also notice that an 

Edit

 button will 

appear on the user screen. If you highlight an action button, hold down 

[Ctrl]

 and click on the 

UE

   

option a 

User Screen Realtime Edit

 dialogue box will appear and this enables you to determine 

what can be edited - directly from the user screen - for the event on that action button, depending on
what type of event is loaded onto the action button.

The options are:

Realtime Edit Enable

 - ticking this item enables realtime editting on the user screen for that 

specific action button.

Enable Bank Page Access

 - If this item is not ticked, then the user can only replace the event on 

this action button with another event of the same type and on the same page of events. If this item is
ticked, it provides  access to page and bank selector buttons enabling the user to replace this event 
with another event of the same type on any bank or page.

Enable File Replace

 - ticking this item enables the user to replace any file-based event with  

another file of the same type. 

Enable Sequence Step Edit

 - if the event on the action button is a 

Manual

, 

Chase

, 

Random

 or 

Snapshot

 sequence then ticking this item enables the user to replace a sequence step with another 

event of the same type. 

Please Note:

This option is not available for 

Timer

 sequences.

176    

 ShowMagic SLX Series User Manual

Summary of Contents for AV










































































































































































































































Reviews:

No comments