ShowMagic AV User Manual Download Page 214

Page: 214 / 233

Unlocking the user screen

To access the main desk screen again, hold down the

[Shift]

key and then press the

[Esc]

key. An

Enter Password

dialogue box will appear. Enter the correct password and click on

Enter

and this

password will return you to the main desk screen. The main desk will still be locked so select the

System Locked

item and enter the password as normal to unlock it.

Quitting the Program

To quit from ShowMagic select

File > Quit Program

on the main desk screen or the user screen

menu.

If a schedule or any events are running you will be prompted, as a safeguard, to turn them off or
not. You will also be prompted as to whether you wish to save the desk or not - click on the buttons
as appropriate.

The ‘Close Window’ cross at the top right of the window is also disabled as a safeguard. You can
only quit ShowMagic via the

File > Quit Program

menu items on the main desk or user screens.

202

ShowMagic SLX Series User Manual

Summary of Contents for AV










































































































































































































































Search results

Summary of Contents for AV

Reviews:

ShowMagic AV, User Manual, Page: 214 / 233

Search results

Summary of Contents for AV

Reviews: