ShowMagic AV User Manual Download Page 104

Page: 104 / 233

6) Double-click on frame 02 to copy that frame into the next empty frame box. Frame 03 is

then automatically selected and highlighted.

7) Click on the blue color (

Color: 03

) in the palette, hold down

[Ctrl]

and double-left-click on

any one of the green cells to turn them all to blue.

8) Double-click on the scene button to run it, adjust the speed and slope faders to suit and you

will see the grid changing colors as selected.

9) Stop the scene, hold down

[Ctrl]

and right-click once on

Opt:

Down

to change it to

. Run

the scene again and the colors will chase from blue to green to red i.e. the frames are
running in the order; 3, 2, 1, 3, 2, 1 etc.

10) Stop the scene, hold down

[Ctrl]

and right-click once on

Run:

Cont

to change it to

. Run

the scene again and the colors will chase from blue to green to red once and it will then stop
automatically.

Let’s create another slightly more complex chase where red, green and blue colors are scrolled
across the grid:

1) Exit the ColorScene panel to the normal scene panel.

2) Highlight the

Scene A002

button and click on the

CScn

button to enter the ColorScene

panel again.

3) This time we will assume we are using a 3 x 3 grid thus:

4) Double-click on

Set

to insert the first frame, click on the color

red (third color palette box) and draw this color vertically down
the first column of cells.

5) Double-click on the first frame box (01) to make a copy of that

frame in the next empty frame box. 02

is then shown in the

second frame box.

Our current frame

6) With frame 02 highlighted, right-click once on the

display (short for

croll on

axis)

and this will scroll the colors to the right.

7) Click on the green color in the palette and draw this down the first column.

8) Double-click on the frame 02 box to make a copy of that frame in the next empty frame box

- 03 and with frame 03 highlighted right-click on

to scroll the colors to the right, select

blue and draw it down the first column.

ShowMagic SLX Series User Manual

Summary of Contents for AV










































































































































































































































Search results

Summary of Contents for AV

Reviews:

ShowMagic AV, User Manual, Page: 104 / 233

Search results

Summary of Contents for AV

Reviews: