Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028
0004205
Page 19 of 22
Rev 2.7 3/13/2018
Step #17
– Attaching Upper Limit Switch
Attach the upper limit switch to the bottom of the winch tube assembly as shown. The holes
will allow the switch to be adjusted so the cable will travel thru the center of the slot in the pivot
arm. The two halves of the bump stop will be mounted to the cable with carriage bolts and kep
nuts, the final placement will not be made until the lift is in the water and the boat can be
loaded into the lift.
