Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028
0004205
Page 4 of 22
Rev 2.7 3/13/2018
Step #4
– Assembly of Lower Side Frame
Using the chart at the bottom of the page find the model that you are assembling, locate the
necessary components that are included in the lower frame bundle. Your assembly will start by
laying two legs down with the corner blocks as shown and using the chart slide a sideframe
tube over the corner block and insert the
short bolt
(see chart) with a
3/8” flat washer into the
hole closest to the post assembly. Secure with flat washer and brass locknut.
DO NOT
TIGHTEN.