Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028
0004205
Page 17 of 22
Rev 2.7 3/13/2018
Step #15
– Dockside Control Box w/Lockout
With the pump and battery mounted it will be time to mount the dockside control box and 35
foot cord unit to the post on the dock side of the lift. The cord will be routed thru the canopy
and attached to the hoop with zip ties or use the underwater conduit kit to run it along the
frame under water..
Open the hose clamps and insert the ends thru the slots in the controller bracket, place on the
leg post next to the dock reconnect the hose clamp and secure. Plug the connector to the one
mounted to the pump. At this time program or check the remotes (refer to the
Quick Start
Hydraulic Controller
instructions included in the pump box for key fob programming and
operation) to be sure they will operate the system.
